BEAVER DTHR 30| Beaver Tracks

DTHR 300

BEAVER BTHR-300 Model, Truck Mounted Hydraulically Operated Water Well Drilling Rig can capable of drilling from 6” to 8” Dia. Bore Holes in hard rock by DTH method, upto 12½” Bore Holes in Unconsolidated / alluvial formations using water / foam flush by Rotary method & Unconsolidated / Gravel / Boundary Formations using ODEX tools up to a depth of 300 Meters (1000 Ft.)

Under favorable Drilling Conditions. The hydraulic pumps shall be powered by either same truck engine through PTO or by a separate diesel drive deck engine. It can be mounted on a single truck version or two truck version.

S.No	Product	Description
	Capacity of Drilling	10” Drilling to a depth of 300 mtrs. (1000 feet)
	Prime mover OS the hydraulic Pumps	Truck Engine / Deck Engine of suitable capacity
	Hydraulic Pumps used	Radial Piston Pumps & Gear Pump
	Maximum operating pressure	230 Bar
	Hydraulic oil tank capacity	800 Ltrs
	Mast Construction	Channel structure
	Mast	Suitable to handle 20ft. pipes
	Centralizer opening	18”
	Pull up force	13000kg
	Pull-down Force	9000 kgs
	Pull-up Speed	40Mts/ min
	Max. Torque in Series Circuit	450 Kg-m @ 0-120 rpm
	Max. Torque in Parallel Circuit	900 Kg-m @ 0-60 rpm
	Hydraulic Jacks (Stabilizers)	4 Nos. of Box Type Ø125x70x610 Stroke
	Break-out wrench (to open the drill joints)	Ø125x350 Stroke
	Water Injection Pump	80 LPM @ 40 Bar
	Airline Lubricator capacity	30 Ltrs.
	Max. Working pressure of the Lubricator	350 PSI
	Auxiliary Winch	1000 Kgs
	Accessories / Optional attachments	Welding Alternator, Main Winch with jib and boom arrangement on the top of the mast.
	Suitable Mud Pump	8”x6”. Driven by either a separate engine or with Hydraulic Motor.
	Air Compressor	1100cfm, 300psi or 1200cfm, 330psi

S.No

Product

Description

Capacity of Drilling

10” Drilling to a depth of 300 mtrs. (1000 feet)

Prime mover OS the hydraulic Pumps

Truck Engine / Deck Engine of suitable capacity

Hydraulic Pumps used

Radial Piston Pumps & Gear Pump

Maximum operating pressure

230 Bar

Hydraulic oil tank capacity

800 Ltrs

Mast Construction

Channel structure

Mast

Suitable to handle 20ft. pipes

Centralizer opening

18”

Pull up force

13000kg

Pull-down Force

9000 kgs

Pull-up Speed

40Mts/ min

Max. Torque in Series Circuit

450 Kg-m @ 0-120 rpm

Max. Torque in Parallel Circuit

900 Kg-m @ 0-60 rpm

Hydraulic Jacks (Stabilizers)

4 Nos. of Box Type Ø125x70x610 Stroke

Break-out wrench (to open the drill joints)

Ø125x350 Stroke

Water Injection Pump

80 LPM @ 40 Bar

Airline Lubricator capacity

30 Ltrs.

Max. Working pressure of the Lubricator

350 PSI

Auxiliary Winch

1000 Kgs

Accessories / Optional attachments

Welding Alternator, Main Winch with jib and boom arrangement on the top of the mast.

Suitable Mud Pump

8”x6”. Driven by either a separate engine or with Hydraulic Motor.

Air Compressor

1100cfm, 300psi or 1200cfm, 330psi

Note:

In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments without prior notice.

BEAVER drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.

DTHR 300

DTHR 300

TECHNICAL SPECIFICATIONS

Note: