BEAVER 650 Model, Ecomet Truck Mounted Hydraulically Operated Water Well Drilling Rig can capable of drilling from 4.5” to 6” Dia. Bore Holes in different formations such as hard rock by DTH method & Unconsolidated / alluvial formations using water / foam flush by Rotary method up to a depth of 200 Meters (500 Ft.)

Under favorable Drilling Conditions. The hydraulic pumps shall be powered by either same pickup engine through PTO or by a separate diesel drive deck engine.


S.No Product Description
1 Capacity of Drilling 4.5” to 6” Drilling to a depth of 200 mtrs. (650 feet)
2 Prime mover of the hydraulic pumps Truck Engine / Deck Engine of suitable capacity
3 Hydraulic Pumps used Radial Piston Pumps & Gear / Vane Pumps
4 Maximum operating pressure 180 Bar
5 Hydraulic oil tank capacity 400 Ltrs.
6 Mast Construction Channel Structure
7 Mast Suitable to handle 10ft. pipes
8 Centralizer opening 270mm
9 Pull up force 8500kg
10 Pull-down Force 4500 Kgs
11 Pull-up Speed 45 Mtrs/min
12 Max. Torque 280 Kg-m
13 Rotation Speed 0-100 Rpm
14 Hydraulic Jacks (Stabilizers) 4 Nos. of Ø100x63x610 Stroke
15 Break-out wrench (to open the drill joints) Ø80x300 Stroke
16 Water Injection Pump 36 LPM @ 40 Bar
17 Airline Lubricator capacity 15 Ltrs.
18 Auxiliary Winch 1000 Kgs
19 Suitable Air Compressor 450cfm, 150psi (or) 650cfm, 200psi


  • In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments without prior notice.
  • BEAVER drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.