BEAVER 2000 Model, Truck Mounted Hydraulically Operated Piling Drilling Rig can capable of drilling from 24” to 36” Dia. Bore Holes in different formations such as medium to hard rock by DTH method up to a depth of 20 Meters (66 Ft.)
Under favorable Drilling Conditions. The hydraulic pumps shall be powered by either same truck engine through PTO or by a separate diesel drive deck engine. It is a two truck version drilling rig.
S.No | Product | Description |
---|---|---|
Capacity of Drilling | 24” to 36” bore hole to a depth of 20 mtr. under favourable drilling conditions. | |
Type of drilling | DTH | |
Prime mover of the hydraulic pumps | Truck Engine / Deck Engine | |
Hydraulic Pumps used | Gear type/ piston type | |
Maximum operating pressure | 250 kg / cm2 | |
Hydraulic oil tank capacity | 800 Ltrs | |
Mast | Suitable to handle 15ft. Rods | |
Mast Construction | Box Type Structure | |
Pull up force | 35,000kg | |
Pull-down Force | 22,000kg | |
Pull-up Speed | 30 Mtrs/min | |
Max. Torque | 570kgmts | |
Hydraulic Jacks (Stabilizers) | 4 nos. Box type | |
Break-out wrench (to open the drill joints) | 100mm*350mm stroke | |
Water Injection Pump | 80lpm at 450psi | |
Carrier | 6x4 / 8x4 Truck | |
Accessories / Optional attachments | Welding set, winch with jib and boom arrangement on the top of the mast. |