Technical Specification Of Beaver DTH 1000

BEAVER 1000 Model, Truck Mounted Hydraulically Operated Water Well Drilling Rig can capable of drilling from 6” to 8” Dia. Bore Holes in different formations such as hard rock by DTH method, Unconsolidated / alluvial formations using  water / foam flush by Rotary method & Unconsolidated / Gravel / Boundary Formations using ODEX tools up to a depth of 300 Meters (1000 Ft.) under favorable Drilling Conditions. The hydraulic pumps shall be powered by either same truck engine through PTO or by a separate diesel drive deck engine. It can be mounted on a single truck version or two truck version.

     
Capacity of Drilling : 6” to 8” Drilling to a depth of 300  mtrs. (1000 feet)
Prime mover of the  hydraulic pumps : Truck Engine / Deck Engine of  suitable capacity
Hydraulic Pumps used : Radial Piston Pumps & Gear Pump
Maximum operating  pressure : 230 Bar
Hydraulic oil tank capacity : 800 Ltrs.
Mast Construction : Channel  Structure
Mast : Suitable to handle 20ft. pipes
Centralizer opening : 18”
Pull-up Force : 11800kg
Pull-down Force : 5800 Kgs
Pull-up Speed : 35 Mtrs/min
Max. Torque in Series Circuit : 280 Kg-m @ 0-120 rpm
Max. Torque in Parallel  Circuit : 560 Kg-m @ 0-60 rpm
Hydraulic Jacks (Stabilizers) : 4 Nos. of Box Type Ø125x70x610  Stroke
Break-out wrench (to open  the drill joints) : Ø100x350 Stroke
Water Injection Pump : 50 LPM @ 40 Bar
Airline Lubricator capacity : 15 Ltrs.
Max. Working pressure of  the Lubricator : 350 PSI
Auxiliary Winch : 1000 Kgs
Accessories / Optional  attachments : Welding Alternator, Main Winch  with jib and boom arrangement on  the top of the mast.
Air Compressor : 1100cfm, 300psi  
 
 

 

Dial Beaver Tracks
  Mobile:
  
 (+91)9949388988
 (+91)9849163007