Capacity of Drilling |
: |
4.5” to 6” DTH Drilling to a depth of 100 mtrs. (330 feet) |
Type of Drilling |
: |
Water Well |
Prime mover of the hydraulic pumps |
: |
Truck Engine / Deck Engine |
Hydraulic Pump used |
: |
Gear Type / Vane Pump |
Maximum operating pressure |
: |
160 Kg/cm2 |
Hydraulic oil tank capacity |
: |
300 Ltrs. |
Mast Construction |
: |
Channel Structure |
Mast |
: |
Suitable to handle 10ft. pipes |
Centralizer opening |
: |
250mm |
Pull-up Force |
: |
6500kg |
Pull-down Force |
: |
4400 Kgs |
Pull-up Speed |
: |
24 Mtrs/min |
Max. Torque |
: |
220 Kg-m |
Rotation Speed |
: |
0-100 Rpm |
Hydraulic Jacks (Stabilizers) |
: |
4 Nos. of Ø100x63x610 Stroke |
Break-out wrench (to open the drill joints) |
: |
Ø80x300 Stroke |
Water Injection Pump |
: |
36 LPM @ 40 Bar |
Suitable Air Compressor |
: |
450cfm, 150psi (or) 650cfm, 200psi |